Springfield .30-06 M 1903

Description

.30-06 Springfield 1903 Mk1 Circa 1918.

Rare rifle with the Pederson Conversion cut-out to the L/H receiver wall, very fine bore with broaching marks still present (barrel dated January 1942), well marked stock and most of the arsenal refurbished finish remaining



Optional extras include:

An exceptionally rare bayonet of the same vintage complete with original scabbard £750

Ammunition pouches and belt to match: £350.00

A collection of ammunition of vintage and modern manufacture.


Some history:

The M1903 Springfield, officially the United States Rifle, Caliber .30-06, Model 1903, is an American five-round magazine-fed, bolt-action service repeating rifle, used primarily during the first half of the 20th century.

The M1903 was first used in combat during the Philippine–American War, and it was officially adopted by the United States as the standard infantry rifle on June 19, 1903, where it saw service in World War I, and was replaced by the faster-firing semi-automatic eight-round M1 Garand starting in 1936.

However, the M1903 remained in service as a standard issue infantry rifle during World War II, since the U.S. entered the war without sufficient M1 rifles to arm all troops. It also remained in service as a sniper rifle during World War II, the Korean War, and the Vietnam War.

It remains popular as a civilian firearm, historical collector's piece, a competitive shooting rifle, and as a military drill rifle.


Background

During the 1898 war with Spain, the Mauser M1893 used by the Spanish Army gained a deadly reputation, particularly from the Battle of San Juan Hill, where 750 Spanish regulars significantly delayed the advance of 15,000 US troops armed with outclassed Springfield Krag–Jørgensen bolt-action rifles and older single-shot Springfield model 1873 trapdoor rifles.

The Spanish soldiers inflicted 1,400 casualties on the US in a matter of minutes. Likewise, earlier in the day, a Spanish force of 540 regulars armed with the same Mauser rifles, under Spanish general Vara Del Rey, held off General Henry Ware Lawton's Second Division of 6,653 American soldiers and an independent brigade of 1,800 men for ten hours in the nearby town of El Caney, keeping that division from assisting in the attack on the San Juan Heights.

A US Army board of investigation was commissioned as a direct result of both battles. They recommended replacement of the Krag.

The 1903 adoption of the M1903 was preceded by nearly 30 years of struggle and politics, using lessons learned from the recently adopted Krag–Jørgensen and contemporary German Mauser Gewehr 98 bolt-action rifles.

The design itself is largely based on the Mauser M1893 and its successive models up to the Gewehr 98 rifle. The M1903's forward receiver ring diameter is 1.305 in (33.15 mm), slightly over the 33 mm (1.30 in) ring diameter of the older "small ring" Mauser models and less than the "large ring" 35.8 mm (1.41 in) Gewehr 98s. The US military licensed many of the Mauser Company's and other German patents, including the spitzer bullet, later modified into the .30-06 Springfield.[6] The M1903 not only replaced the various versions of the U.S. Army's Krag, but also the Lee M1895 and M1885 Remington–Lee used by the United States Navy and the United States Marine Corps, as well as all remaining single-shot trapdoor rifles.

While the Krag had been issued with barrel lengths of both 30-inch rifle and 22-inch carbine models, the Springfield was issued only as a short 24-inch-barrel rifle in keeping with current trends in Switzerland and Great Britain to eliminate the need for both long rifles and carbines.

The two main problems usually cited with the Krag were its slow-to-load magazine and its inability to handle higher chamber pressures for high-velocity rounds.

The United States Army attempted to introduce a higher-velocity cartridge in 1899 for the existing Krags, but its single locking lug on the bolt could not withstand the extra chamber pressure.

Though a stripper-clip or charger loading modification to the Krag was designed, it was clear to Army authorities that a new rifle was required. After the U.S. military's experience with the Mauser rifle in the 1898 Spanish–American War, authorities decided to adopt a stronger Mauser-derived bolt-action design equipped with a charger- or stripper clip-loaded box magazine.

Advances in small arms technology

In 1882, the bolt action Remington Lee rifle design of 1879, with its newly invented detachable box magazine, was purchased in limited numbers by the U.S. Navy.

Several hundred M1882 Lee Navy models (M1882 Remington-Lee) were also subjected to trials by the U.S. Army during the 1880s, though the rifle was not formally adopted. The Navy adopted the M1885, and later different style Lee M1895 (a 6 mm straight pull bolt), which saw service in the Boxer Rebellion. In Army service, both the M1885 and M1895 6 mm Lee were used in the Spanish–American War, along with the .30-40 Krag and the .45-70.

The Lee rifle's detachable box magazine was invented by James Paris Lee, and was very influential on later rifle designs.[citation needed] Other advancements had made it clear that the Army needed a replacement. In 1892, the U.S. military held a series of rifle trials, resulting in the adoption of the .30-40 Krag–Jørgensen rifle.

The Krag officially entered U.S. service in 1894, only to be replaced nine years later by the M1903.

Development

Thousands of Spanish Mauser M1893 rifles, surrendered by Spanish troops in Cuba, were returned to the US and extensively studied at Springfield Armory, where it was decided that the Mauser was the superior design.

U.S. rifle Model 1900 .30 prototype

A prototype rifle was produced in 1900; it was very similar to rifle No. 5, the final Mauser M92 prototype in the U.S. Army rifle trials of 1892. This design was rejected, and a new design combining features of the M1898 Krag rifle and the Spanish Mauser M1893 was developed.

U.S. rifle Model 1901 .30 prototype

Springfield began work on creating a rifle that could handle higher loads around the turn of the 20th century. The Springfield Model 1901 prototype combined the Krag–Jørgensen's cock-on-opening bolt, 30-inch barrel, magazine cutoff, stock and sights with the Mauser M1893's dual locking lugs, external claw extractor, and staggered-column magazine. Taking a cue from the Mauser Gewehr 98, a large safety lug was added to the side of the bolt behind the extractor, which engaged the receiver bridge and prevented the bolt from moving rearwards. The bolt handle was also bent downwards, to make it faster to operate.

The Model 1901 almost entered production. Springfield was sure enough that the Model 1901 prototype would be accepted that they began making some of the parts for it, but it was not accepted; further changes were asked for.

Adoption

Following then-current trends in service rifles, the barrel was shortened to 24 inches after it was discovered that a longer barrel offered no appreciable ballistic advantage, and the shorter barrel was lighter and easier to handle. This "short rifle" also eliminated the need of a shorter carbine for mounted troops or cavalry.

A spike-type bayonet with storage in the forend of the stock was added to the design.

This new design was accepted, type classified and officially adopted as the United States Rifle, Caliber .30, Model 1903 and entered production in 1903. The M1903 became commonly known among its users as the "ought-three" in reference to the year, 1903, of first production.

Despite Springfield Armory's use of a two-piece firing pin and other slight design alterations, the M1903 was, in fact, a Mauser design, and after that company brought suit, the U.S. government was judged to pay $250,000 in royalties to Mauser Werke.

By January 1905, over 80,000 of these rifles had been produced at the federally-owned Springfield Armory. However, President Theodore Roosevelt objected to the design of the sliding rod-type bayonet used as being too flimsy for combat. In a letter to the secretary of war, he said:

I must say that I think that ramrod bayonet is about as poor an invention as I ever saw. As you observed, it broke short off as soon as hit with even moderate violence. It would have no moral effect and mighty little physical effect.

All the rifles to that point consequently had to be re-tooled for a blade-type bayonet, called the "M1905". The sights were also an area of concern, so the new improved Model 1904 sight was also added.

The retooling was almost complete when it was decided another change would be made. It was to incorporate improvements discovered during experimentation in the interim, most notably the use of pointed ammunition, first adopted by the French in the 1890s and later other countries. The round itself was based on the .30-03, but rather than a 220-grain (14 g) round-tip bullet fired at 2,300 ft/s (700 m/s), it had a 150-grain (9.7 g) pointed bullet fired at 2,800 ft/s (850 m/s); the case neck was a fraction of an inch shorter as well. The new American cartridge was designated Cartridge, Ball, Caliber .30, Model of 1906. The M1906 cartridge is better known as the .30-06 Springfield round, used in many rifles and machine guns, and is still a popular civilian cartridge to the present day. The rifle's sights were again re-tooled to compensate for the speed and trajectory of the new cartridge.

By the time of the 1916 Pancho Villa Expedition, the M1903 was the standard issue service rifle of US forces. Some rifles were fitted with both the Warner & Swasey Model 1913 and 1908 "musket sights" during the campaign, "musket sights" being the vernacular at the time for telescopic sights. Anecdotal evidence at the time indicates that some of the rifles were fitted with Maxim suppressors, which would make them the first suppressed rifles used by the US military.

The Warner & Swasey Model 1913 musket sight continued to see service after the Pancho Villa Expedition and during World War I but was eventually deemed inadequate and was removed from the US Army's inventory by the 1920s.

Please email or text as we may be busy helping other customers or instructing on the range most days. First time contacts - Please text your name before telephoning to disable call blocking from unwanted callers. Thank you